|
U.K. |
|
CAL design
and manufacture temperature & process controllers for industrial
machine, equipment and process applications. The controllers are
used in many industries from packaging, plastics, food & drink
and scientific areas.
|
|
|
- Full PID autotuning temperature
controllers
- Dual-outputs
- Alarms with 5 options
- PID heat-cool operation
- Ramp & soak operation
- Sleeve mounting for easy maintenance
- IP66 protection from front panel
- CE, UL & CSA approvals
- Charting and logging software option
- RS232/485 Modbus option (Only for Modle 3300)
- 1/32nd DIN 24 x 48mm
Specification |
Thermocouple |
9 Types |
Type B, E, J, K, L, N,
R, S, T |
Standard |
IPTS/68/DIN 43710 |
CJC rejection |
20:1 (0.05/C) typical |
External Resistance |
100ohm max. |
Resistance
Temperature Detector - (RTD) |
RTD/Pt100 |
2 wire |
Standards |
DIN43760 (100ohm 0C/138.5ohm
100C Pt) |
Bulb current |
0.2mAmax |
Linear
Process Inputs |
mV Range |
0 to 50mV (0 to 20mV,
4 to 20mV) |
Output
Devices |
ssd |
Tto switch a remote SSR
5V dc +0/-15% 15mA non-isolated |
Miniature power relay |
Form A/SPST contacts
(AgCdO) 2A/250 VAC resistive load |
2nd relay (option) |
Form A/SPST contacts
(AgCdO) 1A/250 VAC resistive load |
|
|
|
|
- Full PID autotuning temperature controllers
- Dual-outputs
- Alarms with 5 options
- PID heat-cool operation
- Ramp & soak operation
- Sleeve mounting for easy maintenance
- IP66 protection from front panel
- CE, UL & CSA approvals
- Charting and logging software option
- RS232/485 Modbus option
- 1/16th DIN 48 x 48mm
- Set-point and process temperatures show
Specification |
Thermocouple |
9 Types |
Type B, E, J, K, L, N,
R, S, T |
Standard |
IPTS/68/DIN 43710 |
CJC rejection |
20:1 (0.05/C) typical |
External Resistance |
100ohm max. |
Resistance
Temperature Detector - (RTD) |
RTD/Pt100 |
2 wire |
Standards |
DIN43760 (100ohm 0C/138.5ohm
100C Pt) |
Bulb current |
0.2mAmax |
Linear
Process Inputs |
mV Range |
0 to 50mV (0 to 20mV,
4 to 20mV) |
Output
Devices |
ssd |
Tto switch a remote SSR
5V dc +0/-15% 15mA non-isolated |
Miniature power relay |
Form A/SPST contacts
(AgCdO) 2A/250 VAC resistive load |
2nd relay (option) |
Form A/SPST contacts
(AgCdO) 1A/250 VAC resistive load |
|
|
|
|
- Up to 31 programs (profiles), Up to 126 segments
- Unlimited use of event outputs via the 2nd and 3rd outputs
- Copy/paste/edit/delete functions to simplify program building
- Call another program as a sub-program segment
- Up to 999 program loop cycles, or continuous loop cycling
- Hold back function to ensure the next segment is not started
until the last segment reaches set-point
- 3 power fail recovery options, (hold, continue or reset)
- Front Panel Interrogation of the program position
- Memory usage indication during programming
- Front panel 'release from hold' function to run the program
Specification |
Thermocouple |
9 Types |
Type B, E, J, K, L, N,
R, S, T |
Standard |
IEC 584-1-1 : EN60584-1 |
CJC rejection |
20:1 (0.05/C) typical |
External Resistance |
100ohm max. |
Resistance
Temperature Detector - (RTD) |
RTD/Pt100 |
2 or 3 wire |
Standards |
IEC751 : EN60751 (100ohm
0C / 138.5ohm 100CPt |
Bulb current |
0.2mAmax |
Linear
Process Inputs |
mV Range |
0 to 50mV, +/- 0.1%.
0-20mA, 4-20mA, +/- 0.1%. 0-5V, +/-0.1%. 0-10V, +/-0.1% |
Output
Devices |
SSd1 and SSd2 |
To switch a remote SSR
6V dc (norminal) 20mA non-isolated |
Relay 1, 2, 3 |
Fomr A/SPST contracts
(AgCdO) : 2A/250Vac resistive load |
Analogue output
(f.s.t = full scale typical) |
4-20mA 500ohm max +/-
0.1% f.s.t.
0-5Vdc 10mA (500ohm min) +/- 0.1% f.s.t.
0-10Vdc 10mA (1kohm min) +/- 0.1% f.s.t |
|
|
|
|
- Access
to detailed process data viathe charting and logging features
- Lower cost alternative
to SCADA
- Simple setup, no
programming skills required
- Vast networking
possibilities with OPC client/server architecture
- Parameter setup
of 33 / 93 / 9400 and 9500P controllers
- Click'n'drag graphical
profile setup for 9500P process / temperature controllers
- Multiple programs
and profiles can be saved and called for various applications
- Instrument setting
cloning reduces setup time
|
Product |
License |
Description |
CALgrafix |
1 Client
/ 1 Server |
CAL produces
only, no further clients or servers can be added |
CALgrafix
Professinal |
1 Client
/ 1 Server |
Additional clients and servers can be added
|
CALopc Server |
Server licence
|
Can be used
with CALgrafix professional or other OPC compatible client
|
CALgrafix
Client |
Additional
CALgrafix client licence |
For use
with professional version |
|
|
|